反转指标,td指标使用教程

　　1：通达信一个指标的翻转指标怎么设置

　　主图的话，可以在K线图点鼠标右--主图坐标--翻转坐标，把K线图翻转过来，主图指标也随即翻转。
如果是附图指标，则没法设置，只能通过指标的源码进行修改。

　　2：怎么写出追击反转的红柱选股公式

　　1、公式源码如下：n:=2;
value:ref(every(close<ref(close,1),n),1) and close>ref(close,1);
这是K线反转，如果是指标反转，将CLOSE替换成指标引用的值即可；
2、N值自行调整，表示连跌了多少天；
通达信股票软件追击反转指标选股里的条件设置：
首先要知道等于或大于或小于的值是多少,比如大于80就选取,然后,点加入条件,再次,选取其它指标,重复上述操作后,点执行选股即可。
追击反转指标选股公式如下：
VAR2:=REF(LOW,1);
VAR3:=SMA(ABS(LOW-VAR2),3,1)/SMA(MAX(LOW-VAR2,0),3,1)*100;
VAR4:=EMA(VAR3*10,3);
VAR5:=LLV(LOW,13);
VAR6:=HHV(VAR4,13);
VAR7:=EMA(IF(LOW<=VAR5,(VAR4+VAR6*2)/2,0),3)/618;
VAR8:=IF(VAR7>500,500,VAR7);
STICKLINE(VAR8>-120,0,VAR8,3,1),COLORGRAY;
STICKLINE(VAR8>1 AND KDJ.J>REF(KDJ.J,1) AND REF(KDJ.J,1)<REF(KDJ.J,2),0,VAR8,3,0),COLORRED;
STICKLINE(VAR8>0.1 AND VAR8<1 AND KDJ.J>REF(KDJ.J,1) AND REF(KDJ.J,1)<REF(KDJ.J,2),0,VAR8,3,0),COLOR00FFFF;

　　3：通达信股票软件追击反转指标选股里的条件设置如何填写

　　你首先要知道等于或大于或小于的值是多少,比如大于80就选取,然后,点加入条件,再次,选取其它指标,重复上述操作后,点执行选股即可.

　　以上的数据80是我举例说明,具体的你要根据自己的测试以后选取是大于等于或小于等.

　　‍

　　4：成交量反转指标原理

　　阶段大涨后放巨量是头部区间在形成，反过来大跌几个月后的放量超级倍就是要涨的意思很显然。

　　5：求狄马克的TD指标

　　百度“狄马克的TD准备主图”，有下载。58188那里要论坛币，88gs直接贴了源码，自己复制就行了。通达信的。

　　6：求助分享通达信版德马克TD指标公式源代码

　　TD1:=C;
TD2:=IF(TD1=1 AND REF(TD1,-1)=1 AND REF(TD1,-2)=1 AND REF(TD1,-3)=1 AND
REF(TD1,-4)=1 AND REF(TD1,-5)=1 AND REF(TD1,-6)=1 AND REF(TD1,-7)=1 AND
REF(TD1,-8)=1, 1,0);
TD3:=IF(REF(C,-9)>=REF(C,-13),1,0);
TD4:=IF(TD2=1 AND TD3=1,1,0);
TD5:=IF(H>=REF(LLV(L,5),-3),1,0);
D8:=IF(REF(TD4,1)=1 AND TD5=1,1,0);
D9:=IF(TD4=1 AND TD5=1 AND REF(D8,-1)<>1,1,0);
D10:=IF(REF(TD4,-1)=1 AND TD5=1 AND REF(D8,-2)<>1 AND REF(D9,-1)<>1,1,0);
D11:=IF(REF(TD4,-2)=1 AND TD5=1 AND REF(D8,-3)<>1 AND REF(D9,-2)<>1 AND
REF(D10,-1)<>1,1,0);
D12:=IF(REF(TD4,-3)=1 AND TD5=1 AND REF(D8,-4)<>1 AND REF(D9,-3)<>1 AND
REF(D10,-2)<>1 AND REF(D11,-1)<>1,1,0);
D13:=IF(REF(TD4,-4)=1 AND TD5=1 AND REF(D8,-5)<>1 AND REF(D9,-4)<>1 AND
REF(D10,-3)<>1 AND REF(D11,-2)<>1 AND REF(D12,-1)<>1,1,0);
D14:=IF(REF(TD4,-5)=1 AND TD5=1 AND REF(D8,-6)<>1 AND REF(D9,-5)<>1 AND
REF(D10,-4)<>1 AND REF(D11,-3)<>1 AND REF(D12,-2)<>1 AND REF(D13,-1)<>1,1,0);
D15:=IF(REF(TD4,-6)=1 AND TD5=1 AND REF(D8,-7)<>1 AND REF(D9,-6)<>1 AND
REF(D10,-5)<>1 AND REF(D11,-4)<>1 AND REF(D12,-3)<>1 AND REF(D13,-2)<>1 AND
REF(D14,-1)<>1,1,0);
D16:=IF(REF(TD4,-7)=1 AND TD5=1 AND REF(D8,-8)<>1 AND REF(D9,-7)<>1 AND
REF(D10,-6)<>1 AND REF(D11,-5)<>1 AND REF(D12,-4)<>1 AND REF(D13,-3)<>1 AND
REF(D14,-2)<>1 AND REF(D15,-1)<>1,1,0);
D17:=IF(REF(TD4,-8)=1 AND TD5=1 AND REF(D8,-9)<>1 AND REF(D9,-8)<>1 AND
REF(D10,-7)<>1 AND REF(D11,-6)<>1 AND REF(D12,-5)<>1 AND REF(D13,-4)<>1 AND
REF(D14,-3)<>1 AND REF(D15,-2)<>1 AND REF(D16,-1)<>1,1,0);
SETUP:=D8+D9+D10+D11+D12+D13+D14+D15+D16+D17;
公式不完整，无法实用，以上只能作为借鉴参考。